作者：LI Fengyou1ZHANG Ling1SU Xin2LI Yunlong1HAO Xu1
作者單位：1. School of High Temperature Materials and Magnesium Resource Engineering, University of Science and Technology Liaoning2. Research Institute of Refractories,Yingkou Qinghua Group
刊名：China’s Refractories
ISSN：1004-4493
出版年：2019-12-15
卷：28
期：4
起頁：35-39
止頁：
分類號：TQ175.712.2
語種：英文
關鍵詞：
內容簡介In order to reduce the sintering temperature and improve the properties of sintered corundum, corundum specimens were prepared by granulation and sintering with nano-η-Al2O3 as the raw material and polyvinyl alcohol as the binder. The effects of different sintering temperatures（1 550, 1 600, 1 650 and 1 700 ℃） and holding time（2, 4 and 6 h） on the properties and microstructures of the specimens were studied, and the transformation mechanism of η-Al2O3 was analyzed. The results show that dense sintered corundum with bulk density of 3.74 g/cm~3 and apparent porosity of 1.77% is obtained by calcinating at 1 650 ℃ for 6 h; the phase transition from η-Al2O3 to α-Al2O3 occurs first on the surface of alumina particles and then diffuses rapidly to the interior; at lower sintering temperatures there is no abnormal growth of crystals, the bonding between the grains is tight, transgranular fracture is the main fracture mode, there are fewer intergranular pores, and the grain size is in the range of 3.5-7.5 μm.
所需耐材幣：0
